PASS - TAKER : Anonymos

MCA Modern Desktop Administrator Study Guide Exam MD-100 Windows 10 2019 - Exam Questions

Correct : 49

70% Complete (success)

70 %

False : 21

30% Complete (success)

30 %



Anonymos 2019-11-16T00:23:52

Correct

You are the administrator in charge of a computer that runs both Windows 7 and Windows 10. Windows 10 is installed on a different partition from Windows 7. You have to make sure that the computer always starts Windows 7 by default. What action should you perform?

The Boot Configuration Data (BCD) store contains boot information parameters that were previously found in Boot.ini in older versions of Windows. To edit the boot options in the BCD store, use the bcdedit utility, which can be launched only from a command prompt.

Not Correct

You are the administrator for a Windows 10 computer. You have decided to use Windows Update, but you want to be able to change the settings manually. What should you do?

By modifying the changes on the local Group Policy, you can manually configure your Windows Update settings. You can automatically configure the Windows Update settings by creating a server-issued Group Policy Object (GPO).

Correct

You want to initiate a new installation of Windows 10 from the command line. You plan to accomplish this by using the Setup.exe command-line setup utility. You want to use an answer file with this command. Which command-line option should you use?

The /unattend option can be used with the Setup.exe command to initiate an unattended installation of Windows 10. You should also specify the location of the answer file to use when using the Setup.exe utility.

Correct

You are the network administrator for your organization. You have a reference computer that runs Windows 10. You need to create and deploy an image of the Windows 10 computer. You create an answer file named answer.xml. You have to make sure that the installation applies the answer file after you deploy the image. Which command should you run before you capture the image?

You would use the Sysprep utility. The /generalize option prevents system-specific information from being included in the image.

Correct

You have a Windows 10 Windows Image (.wim) that is mounted. You need to view the list of third-party drivers installed on the WIM. What should you do?

The DISM utility with the /get-drivers switch allows you to find out which drivers are installed on the .wim.

Not Correct

You are planning on deploying 1,000 new Windows 10 computers throughout your company. Each new computer has the same configuration. You want to create a reference image that will then be applied to the remaining images. Which of the following utilities should you use?

DISM is a command-line utility that can be used to create and manage Windows 10 image (.wim) files. You can configure a reference installation as desired and then use DISM to create an image of the installation that can then be deployed to the remaining computers.

Correct

You are the network administrator for a large organization. You are in charge of developing a plan to install 200 Windows 10 computers in your company’s data center. You decide to use WDS. You are using a Windows Server 2012 R2 domain and have verified that your network meets the requirements for using WDS. What command-line utility should you use to configure the WDS server?

WDSUTIL is a command-line utility that can be used to configure the WDS server. Several other configuration options need to be specified on the WDS server, and you can set them using WDSUTIL.

Correct

Will is the network manager for a large company. He has been tasked with creating a deployment plan to automate installations for 100 computers that need to have Windows 10 installed. Will wants to use WDS for the installations. To fully automate the installations, he needs to create an answer file. Will does not want to create the answer files with a text editor. What other program can he use to create unattended answer files via a GUI interface?

Windows System Image Manager (SIM) is used to create unattended answer files in Windows 10. It uses a GUI-based interface to set up and configure the most common options that are used within an answer file.

Correct

You are using WDS to install 20 Windows 10 computers. When the clients attempt to use WDS, they are not able to complete the unattended installation. You suspect that the WDS server has not been configured to respond to client requests. Which one of the following utilities would you use to configure the WDS server to respond to client requests?

You enable WDS servers to respond to client requests through the Windows Deployment Services (WDS) Microsoft Management Console (MMC) Snap-in. In the PXE Properties dialog box, enable the option Respond To Client Computers.

Correct

You want to install a group of 25 computers using disk images created in conjunction with the System Preparation Tool. Your plan is to create an image from a reference computer and then copy the image to all the machines. You do not want to create an SID on the destination computer when you use the image. Which Sysprep.exe command-line option should you use to set this up?

The /generalize option prevents system-specific information from being included in the image. The Sysprep.exe command can be used with a variety of options. You can see a complete list by typing sysprep/? at a command-line prompt.

Correct

You are the network administrator for a Fortune 500 company. The Accounting department has recently purchased a custom application for running financial models. To run properly, the application requires that you make some changes to the computer policy. You decide to deploy the changes through a Local Group Policy setting. You suspect that the policy is not being applied properly because of a conflict somewhere with another Local Group Policy setting. What command should you run to see a list of how the group policies have been applied to the computer and the user?

The Group Policy Result Tool is accessed through the GPResult command-line utility. The gpresult command displays the resulting set of policies that were enforced on the computer and the specified user during the logon process.

Correct

You have a Windows 10 computer that is located in an unsecured area. You want to track usage of the computer by recording user logon and logoff events. To do this, which of the following auditing policies must be enabled?

Audit Account Logon Events is used to track when a user logs on, logs off, or makes a network connection. You can configure auditing for success or failure, and audited events can be tracked through Event Viewer.

Not Correct

You are the administrator for a printing company. After you configure the Password Must Meet Complexity Requirements policy, several users have problems when changing their passwords. Which of the following passwords meet the minimum complexity requirements? (Choose all that apply.)

The password Abcde! meets complexity requirements because it is at least six characters long and contains an uppercase letter, lowercase letters, and a symbol. The password 1247445Np meets complexity requirements because it is at least six characters long and contains an uppercase letter, a lowercase letter, and numbers. Complex passwords must be at least six characters long and contain three of the four types of characters—uppercase letters, lowercase letters, numbers, and symbols.

Correct

You are the administrator for StormWind Studios. You want to configure some Local Group Policy Objects (LGPOs) on your Windows 10 machines. Which of the following is not configurable through a LGPO on Windows 10?

Windows 10 LGPOs allow you to configure all of the above except for folder redirection. Folder redirection needs to be done through a server based Group Policy Object (GPO).

Correct

You are the administrator of a large company. You believe that your network’s security has been compromised. You do not want hackers to be able to repeatedly attempt user logon with different passwords. What Local Security Policy box should you define?

Account Lockout Policy, a subset of Account Policies, is used to specify options that prevent a user from attempting multiple failed logon attempts. If the Account Lockout Threshold value is exceeded, the account will be locked. The account can be reset based on a specified amount of time or through administrator intervention.

Correct

You have recently hired Will as an assistant for network administration. You have not decided how much responsibility you want Will to have. In the meantime, you want Will to be able to restore files on Windows 10 computers in your network, but you do not want Will to be able to run the backups. What is the minimum assignment that will allow Will to complete this task?

The Restore Files and Directories user right allows a user to restore files and directories regardless of file and directory permissions. Assigning this user right is an alternative to making a user a member of the Backup Operators group.

Correct

You are the network administrator of a medium-size company. Your company requires a fair degree of security, and you have been tasked with defining and implementing a security policy. You have configured password policies so that users must change their passwords every 30 days. Which password policy would you implement if you want to prevent users from reusing passwords they have used recently?

The Enforce Password History policy allows the system to keep track of a user’s password history for up to 24 passwords. This prevents a user from using the same password over and over again.

Correct

Your network’s security has been breached. You are trying to redefine security so that a user cannot repeatedly attempt user logon with different passwords. To accomplish this, which of the following items in the Local Security Policy box should you define?

Account Lockout Policy, a subset of Account Policies, is used to specify options that prevent a user from attempting multiple failed logon attempts. If the Account Lockout Threshold value is exceeded, the account will be locked. The account can be reset based on a specified amount of time or through administrator intervention.

Correct

You have been asked to create a new local user on Windows 10 by using Windows Power- Shell. Which of the following PowerShell commands allow you to create a new local user on Windows 10?

The New-LocalUser command allows you to create a new local user on a Windows 10 machine.

Correct

You are setting up a machine for a home user who does not know much about computers. You do not want to make the user a local administrator, but you do want to give this user the right to change Windows Updates manually. How can you configure this?

You do not want this user to have any administrator rights. To allow this user to change Windows Update manually, you must set this in an LGPO.

Not Correct

You are the IT manager for your company. You have been asked to give the Sales group the rights to read and change documents in the StormWind Documents folder. The following table shows the current permissions on the Stormwind Documents shared folder: _________________________________________________________ Group/User NTFS Shared Sales Read Read Marketing Modify Change _________________________________________________________ What do you need to do to give the Sales group the rights to do their job? (Choose all that apply.)

The Sales group needs Modify on the NTFS security and Change shared permission settings in order to do their job.

Correct

You are the network administrator for a large organization. You have a Windows 10 machine that needs to prevent data from being accessed if the hard drive is stolen. How do you accomplish this task?

Windows 10 comes with a feature called BitLocker Drive Encryption. BitLocker encrypts the drive so if it’s removed or stolen, the data can’t be accessed. To configure BitLocker, you must either use a Local Group Policy or use the BitLocker icon in Control Panel.

Not Correct

In which editions of Windows 10 can you enable BitLocker? (Choose all that apply).

BitLocker Drive Encryption is a data protection feature available in Windows Education, Enterprise, and Professional editions of Windows 10.

Not Correct

You have a network folder that resides on an NTFS partition on a Windows 10 computer. NTFS permissions and share permissions have been applied. Which of the following statements best describes how share permissions and NTFS permissions work together if they have been applied to the same folder?

When both NTFS and share permissions have been applied, the system looks at the effective rights for NTFS and share permissions and then applies the most restrictive of the cumulative permissions. If a resource has been shared and you access it from the local computer where the resource resides, then you will be governed only by the NTFS permissions.

Not Correct

You are the network administrator for a medium-sized company. Rick was the head of HR and recently resigned. John has been hired to replace Rick and has been given Rick’s laptop. You want John to have access to all of the resources to which Rick had access. What is the easiest way to manage the transition?

The easiest way to manage this transition is to simply rename Rick’s account to John. It is very important to remember that rights and permissions get associated to a user’s SID number and not a username. By renaming Rick’s account to John, John will automatically have all of the rights and permissions to any resource that Rick had access to.

Correct

Jeff, the IT manager for Stormwind, has been asked to give Tom the rights to read and change documents in the Stormwind Documents folder. The following table shows the current permissions on the shared folder: ___________________________________________________ Group/User NTFS Shared Sales Read Change Marketing Modify Change R&D Deny Full Control Finance Read Read Tom Read Change ___________________________________________________ Tom is a member of the Sales and Finance groups. When Tom accesses the Stormwind Documents folder, he can read all the files, but the system won’t let him change or delete files. What do you need to do to give Tom the minimum amount of rights to do his job?

By giving Tom Modify on the NTFS security setting, you’re giving him just enough to do his job. You could also give Sales or Finance the Modify permission, but then everyone in those groups would be able to delete, change, and do more than they all need. Also, Tom does not need Full Control to change or delete files

Correct

You are the IT manager for your company. You have been asked to give the Admin group the rights to read, change, and assign permissions to documents in the Stormwind Documents folder. The following table shows the current permissions on the Stormwind Documents shared folder: _______________________________________________________ Group/User NTFS Shared Sales Read Change Marketing Modify Change R&D Deny Full Control Finance Read Read Admin Change Change _______________________________________________________ What do you need to do to give the Admin group the rights to do their job? (Choose all that apply.)

The Admin group needs Full Control on the NTFS security and shared permission settings in order to do their job. To be able to give other users permissions, you must have the Full Control permission.

Correct

Vincent is an instructor for Stormwind and he is talking to Paige, the company IT Manager. Vince asks Paige to implement some type of two-factor authentication. What can Paige install to complete this request?

Smart cards are plastic cards (the size of a credit card) that can be used in combination with other methods of authentication. This process of using a smart card along with another authentication method is called two-factor authentication or multi-factor Authentication.

Correct

You are using Windows 10 and you have created a file called “my text,” and it was created in Notepad and has a .txt extension type. You need to change the extension type from .txt to .vbx. What setting do you need to change on the folder so that you can see the extension types?

Filename extensions for known files are hidden by default. If you want to be able to see the filename extension for all files, you must uncheck the box Hide Extensions For Known File Types.

Correct

The owner of your company has come to you and stated that they want all of the hardware on all systems to use BitLocker and BitLocker To Go. What utility should you install to help manage and maintain BitLocker and BitLocker To Go?

Microsoft BitLocker Administration and Monitoring (MBAM) will allow the IT department to use enterprise-based utilities for managing and maintaining BitLocker and BitLocker To Go.

Correct

You are the Network Administrator for StormWind Studios. You need to remove an old Registry key from a Windows 10 machine. Which of the following options could you use to remove the old Registry key?

In Windows 10, you can edit the Registry with REGEDIT or REGEDT32. You should always use extreme caution when editing the Registry because improper configurations can cause the computer to fail to boot.

Correct

You have a user, Rob, who uses a laptop computer running Windows 10. You have configured the laptop to enter sleep mode after 30 minutes of inactivity. What will occur when the computer enters sleep mode?

When the computer enters sleep mode, the data will be saved to memory, and the computer will be put into a power-saving state. Sleep mode combines the features of standby and hibernation so that all data is saved, but the computer restores faster than if the computer was put into hibernation mode.

Correct

You want to speed up the resume time on your computer after it is put into hibernation mode. You have installed a hybrid hard disk drive into your Windows 10 computer. Which technology should you use to accomplish your goal?

You should use the Windows ReadyDrive technology to help speed the resume time of your computer after it has been put into hibernation mode. ReadyDrive is a new technology that is used in conjunction with hybrid hard disk drives, which combine flash memory with standard hard disk technology. This allows data to be stored in flash memory, which enables the hard disk to remain spun down longer and also improves the time required for the computer to resume after being put into hibernation mode.

Not Correct

A new employee named Crystal has been supplied with a Windows 10 laptop computer. You have configured Crystal’s computer with the Power Saver power plan, and you used the default options. Which of the following will occur after 20 minutes of inactivity on Crystal’s computer?

When a Windows 10 computer is configured with the Power Saver power plan, the computer’s display and hard disk will be turned off after 20 minutes of inactivity in order to conserve energy. The computer will be put into sleep mode after one hour of inactivity when using the Power Saver power plan.

Correct

You are the network administrator for a medium-size company. You support all user Desktop issues. Gary is using the default Windows 10 Desktop on his laptop computer. Gary wants to change his Desktop settings. Which of the following options should Gary use to configure the Desktop in Windows 10?

The easiest way to configure the Desktop is by right-clicking an open area of the Desktop and choosing Personalize.

Correct

You work on the help desk for a large company. One of your users calls you and reports that they just accidentally deleted their C:\Documents\Timesheet.xls file. What is the easiest way to recover this file?

The easiest way to recover a deleted file is to restore it from the Recycle Bin. The Recycle Bin holds all of the files and folders that have been deleted as long as there is space on the disk. From this utility, you can retrieve or permanently delete files.

Correct

You are the system administrator for your company. You are configuring the services on a Windows 10 computer. You want to ensure that if a service fails to load, it will attempt to restart. Which tab of the service’s Properties dialog box should you use?

You can configure what actions will occur if the service fails to start on the Recovery tab of the service’s Properties dialog box. For example, you can configure the service to attempt to restart, or you can configure the computer to reboot.

Not Correct

The system administrator of your network wants to edit the Registry, including setting security on the Registry keys. What primary utilities that support full editing of the Windows 10 Registry should the system administrator use? (Choose all that apply.)

In Windows 10, you can edit the Registry with REGEDIT or REGEDT32. You should always use extreme caution when editing the Registry because improper configurations can cause the computer to fail to boot.

Correct

Kayla is dissatisfied with the configuration of her keyboard and mouse. She wants to reset the keyboard speed and the mouse pointer rate. Which utility should she use to configure the keyboard and mouse properties?

You configure keyboard and mouse properties in Control Panel.

Correct

Denise is using a laptop computer that uses ACPI. She wants to see what percentage of the battery power is still available. She also wants to know if hibernation has been configured. Which of the following utilities should she use?

On a laptop computer, Denise can use the battery meter to view the amount of battery power available and to change the power plan configured for the computer.

Correct

You are the network administrator for your organization. You have been asked by the owner of the company to verify that all drivers installed on the Windows 10 machines are signed drivers. How do you accomplish this task?

Running the Sigverif.exe program will run a check against all the drivers installed on your machine and then notify you of any drivers that are unsigned.

Not Correct

You are the network administrator for your organization. You have a Windows 10 Enterprise system called PS1 that is configured with multiple shared print queues. You need to migrate the print queues to a new machine called PS2. How do you do that?

The Print Management tool has a utility called Migrate Printers. This utility allows an administrator to migrate the print server queues from one machine and transfer those print settings to another machine.

Correct

Your computer uses a SCSI adapter that supports a SCSI drive, which contains your Windows 10 system and boot partitions. After updating the SCSI driver, you restart your computer, but Windows 10 will load but with errors. You need to get this computer up and running as quickly as possible. Which of the following strategies should you try first to correct your problem?

If you need to get a stalled computer up and running as quickly as possible, you should start with the Driver Rollback option. This option is used when you’ve made changes to your computer’s hardware drivers and now you have issues.

Not Correct

You are about to install a new driver for your CD-ROM drive, but you are not 100 percent sure that you are using the correct driver. Which of the following options will allow you to most easily return your computer to the previous state if the new driver is not correct?

The Roll Back Driver option is the easiest way to roll back to a known good driver. You could also use the System Restore utility to roll back your computer to a known restore point if you make harmful changes to your computer, but Driver Rollback is easier and faster.

Not Correct

You are the network administrator for your organization. Your organization has been using Windows 10 Enterprise. You need to run the Print Management tools from the command prompt. What command do you run?

The Printbrm.exe command should be run from a command prompt with administrative permission. This command is the command-line version of the Print Management tool.

Correct

You are using Windows 10 Professional and you have a hardware component that is no longer needed. You do not want to delete the drivers but you do not want them active. What can you do to the drivers?

When you disable the drivers, the drivers are still installed on the Windows 10 system but they are not active. Administrators like to use the disable option so the user can always re-enable the drivers later for use.

Not Correct

You are the network administrator for a small organization. Your organization has implemented Windows 10 on all client machines. You want to implement another line of security on the Windows 10 machine so unauthorized users can’t access the machines. What can you implement on the Windows 10 machines?

Windows Defender Firewall, which is included with Windows 10, helps to prevent unauthorized users or malicious software from accessing your computer. Windows Defender Firewall does not allow unsolicited traffic (traffic that was not sent in response to a request) to pass through the firewall.

Correct

You are the network administrator for a large organization. One of your users calls you and states that they think they are having issues with their network card. What tool can you use to see if the hardware is working properly?

Device Manager is the utility included with Windows 10 that allows you to configure and manage your devices and hardware. You can also configure your drivers within Device Manager.

Not Correct

You are the network administrator for a large organization. You have a Windows 10 machine that is working fine, but you downloaded and installed a newer version of the network adapter driver. After you load the driver, the network device stops working properly. Which tool should you use to help you fix the problem?

Driver rollback allows you to replace a newly installed driver with the previous driver. You can do the driver rollback using the Device Manager utility.

Correct

You are using Windows 10 and you want to update your video drivers. How do you accomplish this?

To get the latest drivers for any piece of hardware, you need to use the Upgrade Drivers button in Device Manager. After the upgrade button is chosen, you can use downloaded drivers or drivers from a new DVD.

Correct

You have two DHCP servers on your network. Your computer accidentally received the wrong IP and DNS server configuration from a DHCP server that was misconfigured. The DHCP server with the incorrect configuration has been disabled. What commands could you use to release and renew your computer’s DHCP configuration? (Choose two.)

The ipconfig /release and the ipconfig /renew commands will allow your machine to receive a new IP address from the DHCP server.

Correct

You are the network administrator for your company. Your service provider has assigned you the network address 192.168.154.0. You have been granted the entire range to use. What class of address have you been assigned?

Because the first octet starts with 192, it’s a Class C. If the first octet starts with 1–126, it’s a Class A. 128–191 is a Class B, and 192–223 is a Class C.

Correct

You are the network administrator for your company. After configuring a new computer and connecting it to the network, you discover that you cannot access any of the computers on the remote subnet by IP address. You can access some of the computers on the local subnet by IP address. What is the most likely problem?

The default gateway is the router’s IP address. The default gateway allows you to get from your subnet to another subnet.

Correct

A user cannot access a server in the domain. After troubleshooting, you determine that the user cannot access the server by name but can access the server by IP address. What is the most likely problem?

The DNS server turns a hostname into an IP address so you can connect to a machine by the machine name. If you can connect to a machine by using the TCP/IP address but not the name, DNS is the issue.

Correct

You have a Windows 10 machine that needs to have a static TCP/IP address. You assign the IP address to the machine and you now want to register the computer with DNS. How can you do this from the Windows 10 machine?

Ipconfig /registerdns will automatically register the Windows 10 machine with the DNS server. The registration will include the Windows 10 machine name and the IP address.

Not Correct

You have been hired as a TCP/IP contractor for an organization who wants to redo their network. The company currently uses a 192.168.x.x class but they are projecting a hiring of over 500 new employees this year. They currently have 175 employees. They do not want to buy a new TCP/IP class. What can you do to help them? (Choose all that apply.)

You have to use either a Class A or Class B. Class C addresses can only handle 254 users. 10.x.x.x and 172.16.x.x are both able to handle the 675 users and they are both internal private address schemes that anyone can use.

Correct

You are hired by a small company to set up a network. The company sells pocket watches and they have only five employees. They can’t afford a server and client access licenses. What type of network can you set up for them?

Create a new Workgroup and add all the employees to the Workgroup. You don’t want to use a HomeGroup because even though it’s five users, you need to make sure that permissions are setup properly so that users can’t look at data of other users. Because they are never going to get any larger, there is no reason to have them use any version of Active Directory or Windows Server.

Correct

Which of the following IP addresses are Class A addresses? (Choose all that apply.)

Class A addresses go from 1–126 (127 is used for the loopback address). Class B addresses go from 128–191, and Class C addresses are from 192–223.

Not Correct

Which of the following IP addresses are Class B addresses? (Choose all that apply.)

Class A addresses go from 1–126 (127 is used for the loopback address). Class B addresses go from 128–191, and Class C addresses are from 192–223.

Correct

You are the network administrator for a large organization with many laptop users who go on the road. Your organization would like to start moving away from users connecting in by VPN to get data. They have decided that they want to start moving the entire IT department to the cloud. What version of Active Directory can they start using?

Azure is Microsoft’s cloud-based Active Directory subscription. Azure is great if you don’t want to deal with the worries of managing and maintaining a server room and all of the hardware and it’s also great for accessing Active Directory from anywhere in the world.

Correct

You need to stop an application from running in Task Manager. Which tab would you use to stop an application from running?

All of the applications that are running on the Windows 10 machine will show up under the Details tab. Right-click the application and end the process.

Not Correct

You have a computer that runs Windows 10. You upgrade the network adapter driver on the computer. After the upgrade, you can no longer access network resources. You open Device Manager and see a warning symbol next to the network adapter. You need to restore access to network resources. What should you do?

The Roll Back Driver option is the fastest way to return the driver to the previous version. You could also use System Restore, but rolling a Driver back is easier and faster.

Not Correct

You need to back up the existing data on a computer before you install a new application. You also need to ensure that you are able to recover individual user files that are replaced or deleted during the installation. What should you do?

The Back Up Now button allows you to start a backup and configure a Windows 10 backup.

Correct

Your data-recovery strategy must meet the following requirements: ?? Back up all data files and folders in C:\Data. ?? Restore individual files and folders in C:\Data. ?? Ensure that data is backed up to and restored from external media. What should you do?

If you need to back up and restore your Windows 10 machine, you need to use the Windows 10 Backup and Restore Center.

Correct

You need to ensure that you can recover system configuration and data if your computer hard disk fails. What should you do?

Using images allows you to back up and restore your entire Windows 10 machine instead of just certain parts of data.

Correct

You have a computer that runs Windows 10. Your computer has two volumes, C: and D:. Both volumes are formatted by using the NTFS filesystem. You need to disable previous versions on the D: volume. What should you do?

If you need to disable previous versions on the D: volume, this needs to be done from the System Protection settings in the computer system properties.

Not Correct

You have a computer that runs Windows 10. You configure a backup job to back up all files and folders on an external NTFS filesystem hard disk drive. The backup job fails to back up all files that have the encryption attribute set. You need to back up all encrypted files. The backed-up files must remain encrypted. What should you do?

You have to manually copy all the encrypted files because the backup software will not work with the encrypted files in Windows 10.

Not Correct

You have a computer that runs Windows 10. You use Windows Backup and Restore to create a backup image. You need to perform a complete restore of the computer. What are two possible ways to begin the restore? (Each correct answer presents a complete solution. Choose two.)

There are two ways to repair system files on Windows 10. You can do it by using the installation disc and choosing Repair during the installation, or you can boot to the advanced options and select Repair Your Computer.

Not Correct

You are the network administrator for your organization. You are asked by a junior administrator when he should create restore points. Which of the following are times when restore points should be created? (Choose all that apply.)

Restore points allow you to bring your system back to a previous point in time, and they should be created at all of the times listed.

Correct

You install Windows 10 on a new computer. You update the video card driver and restart the computer. When you start the computer, the screen flickers and then goes blank. You restart the computer and receive the same result. You need to configure the video card driver. What should you do first?

Starting the computer in Safe Mode loads the basic VGA drivers and allows you to fix any video issues, including using the Driver Rollback utility.